PARKING ASSIST MONITOR SYSTEM(for Navigation Receiver Type) INITIALIZATION

  1. INITIALIZE PARKING ASSIST MONITOR SYSTEM

    1. When "System initializing" is displayed on the navigation ECU sub-assembly, correct the steering angle neutral point using the following method.

      1. Fully turn the steering wheel to the right and left on flat ground.

        Note:

        Memorizing the steering angle neutral point must be carried out with the engine started. Apply the parking brake, depress the brake pedal, check that the shift lever is in P (except Manual Transaxle), and ensure that the vehicle is not moving.

        Tip:

        • The "?" button is displayed at the same time as "System initializing". If the "?" button is selected, this method is displayed.

        • If the steering angle neutral point is not memorized even after fully turning the steering wheel to the right and left, perform steering angle setting to memorize the steering angle neutral point.

          Click here