INTAKE AIR TEMPERATURE SENSOR INSTALLATION

PROCEDURE

1. INSTALL INTAKE AIR TEMPERATURE SENSOR

   
   

   1. 

      Install a new gasket to the sensor.

   2. Using a 22 mm ball joint lock nut wrench, install the sensor.

      Torque:

      34 N*m  { 350 kgf*cm, 25 ft.*lbf }

      Note

      Use the formula to calculate special torque values for situations where a ball joint lock nut wrench is combined with a torque wrench Click here.

   3. Connect the sensor connector.

2. INSTALL ENGINE UNDER COVER

   Click here

3. INSTALL FRONT LOWER BUMPER ABSORBER

   Click here