RAIN SENSOR REMOVAL

PROCEDURE

  1. REMOVE RAIN SENSOR COVER

    1. E264993

      Disengage the 2 guides and disconnect the rain sensor cover as shown in the illustration.

    2. E264995

      Disengage the 2 claws and remove the rain sensor cover.

  2. REMOVE RAIN SENSOR

    1. E264996

      Disconnect the connector.

    2. E264997C02

      *a

      Stopper

      Release the stopper by pulling the stopper down and disconnect the rain sensor as shown in the illustration.

  3. CLEAN WINDSHIELD GLASS

    Tip:

    • Rain sensor tape is reusable. Only replace the tape if it is damaged or contaminated.

    • Check that there is no rain sensor tape residue remaining on the windshield glass. If there is, remove the residue before installing the rain sensor.