ПЕРЕДНИЙ САЛЬНИК КОЛЕНЧАТОГО ВАЛА УСТАНОВКА

PROCEDURE


  1. INSTALL TIMING CHAIN COVER OIL SEAL


    1. Apply MP grease to the lip of a new timing chain cover oil seal.

      Note


      • Keep the lip free from foreign matter.

      • Do not allow MP grease to contact the dust seal.

    2. A01IJ75C01
      *a -0.75 to -1.45 mm (-0.0295 to -0.0571 in.)

      Using SST and a hammer, tap in the timing chain cover oil seal.

      SST
      09636-20010
      Standard Depth
      -0.75 to -1.45 mm (-0.0295 to -0.0571 in.) (From the edge of the timing chain cover assembly)

      Note

      Do not tap in the timing chain cover oil seal at an angle.

  2. INSTALL CRANKSHAFT PULLEY

    Click here

  3. INSTALL V-RIBBED BELT

    Click here

  4. INSPECT FOR ENGINE OIL LEAK

    Click here