AIR FUEL RATIO SENSOR REMOVAL

PROCEDURE

1. REMOVE COWL TOP PANEL OUTER

   Tip:

   • for LHD:Click hereClick hereClick hereClick hereClick hereClick here

   • for RHD:Click hereClick here

2. REMOVE NO. 2 CYLINDER HEAD COVER

   Click hereClick hereClick hereClick here

3. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

   Click here

4. REMOVE AIR CLEANER CASE SUB-ASSEMBLY

   Click hereClick hereClick hereClick here

5. REMOVE AIR FUEL RATIO SENSOR

   1. 

      Disconnect the air fuel ratio sensor connector.

   2. Disengage the clamp and disconnect the air fuel ratio sensor wire from the wire harness clamp bracket.

   3. 

      Using SST, remove the air fuel ratio sensor from the exhaust manifold.

      09224-00010

      Note:

      If a component has been dropped or subjected to a strong impact, replace it.