HEADLIGHT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE

  1. INSTALL HEADLIGHT ASSEMBLY LH

    1. Connect the connectors.

    2. Attach the clamp.

    3. Install the headlight with the bolt, 2 screws and clip.

  2. INSTALL FRONT BUMPER BAR REINFORCEMENT LH

    Click here

  3. INSTALL FRONT BUMPER COVER

    Click here

  4. INSTALL RADIATOR GRILLE

    1. Install the radiator grille (Click here).

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  6. PREPARATION FOR HEADLIGHT AIMING ADJUSTMENT (Using a screen)

    Click here

  7. INSPECT HEADLIGHT AIMING

    Click here

  8. ADJUST HEADLIGHT AIMING

    Click here

  9. PREPARATION FOR FOG LIGHT AIMING

    Click here

  10. INSPECT FOG LIGHT AIMING

    Click here

  11. ADJUST FOG LIGHT AIMING

    Click here