HEIGHT CONTROL OFF SWITCH REMOVAL

PROCEDURE

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note:

    • After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click hereClick hereClick here).

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click hereClick hereClick hereClick hereClick here).

  2. REMOVE INSTRUMENT PANEL FINISH PANEL END LH

    Click hereClick here

  3. REMOVE INSTRUMENT PANEL FINISH PANEL END RH

    Click hereClick here

  4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

    Click hereClick here

  5. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY

    Click hereClick here

  6. REMOVE COMBINATION SWITCH ASSEMBLY (HEIGHT CONTROL OFF SWITCH)

    1. C219791

      Remove the 4 screws and combination switch (height control off switch) from the upper console panel.