CAMSHAFT OIL CONTROL VALVE INSTALLATION

PROCEDURE

1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

   1. Apply a light coat of engine oil to a new O-ring and install it to the camshaft timing oil control valve assembly.

      Note:

      Do not damage the O-ring.

   2. Install the camshaft timing oil control valve assembly to the cylinder head sub-assembly with the bolt.

      10 N*m

      102 kgf*cm

      7 ft.*lbf

      Note:

      • If the camshaft timing oil control valve assembly has been struck or dropped, replace it.

      • Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve assembly (connecting surface with the cylinder head sub-assembly).

      • Make sure that the O-ring is not cracked or does not move out of place during installation.

   3. Connect the camshaft timing oil control valve assembly connector.

2. INSTALL INTAKE MANIFOLD (for LHD)

   Click here

3. INSTALL INTAKE MANIFOLD (for RHD)

   Click here

4. INSPECT FOR OIL LEAK

   Click here