| B1245 |
Lost Communication with Wiper ECU LIN |
When the battery voltage is 9.5 V or more, a communication malfunction between the main body ECU (multiplex network body ECU) and front wiper motor and link assembly is detected for 10 seconds or more. |
Click here
|
| B1278 |
Lost Communication with Combination Switch ECU |
When the battery voltage is 9.5 V or more, a communication malfunction between the main body ECU (multiplex network body ECU) and windshield wiper switch assembly is detected for 10 seconds or more. |
Click here
|
| B1279 |
Lost Communication with Humidity/Rain Sensor LIN |
When the battery voltage is 9.5 V or more, a communication malfunction between the main body ECU (multiplex network body ECU) and rain sensor is detected for 10 seconds or more. |
Click here
|
| B1370 |
ECU Malfunction |
When the battery voltage is 9.5 V or more, a malfunction is detected for 10 seconds or more during the front wiper motor and link assembly self-check. |
Click here
|
| B1372 |
Wiper Switch Signal Mismatch between LIN and Line |
When the battery voltage is 9.5 V or more, the operation signals sent via LIN communication and direct line do not match for 10 seconds or more. |
Click here
|
| B1373 |
Lost Communication with Wiper System LIN BUS |
When the battery voltage is 9.5 V or more, a malfunction in the communication or LIN communication line between the main body ECU (multiplex network body ECU) and components of the wiper system occurs for 7 seconds or more 3 times consecutively. |
Click here
|
| B1400 |
Rain Sensor Malfunction |
-
When the battery voltage is 9.5 V or more, the rain sensor temperature is abnormal for 10 seconds or more.
-
When the battery voltage is 9.5 V or more, the output of the LED built into the rain sensor is abnormal for 2 seconds or more.
|
Click here
|