8NR-FTS STARTING TORQUE SPECIFICATIONS
Part Tightened |
N*m |
kgf*cm |
ft.*lbf |
in.*lbf |
|||
|---|---|---|---|---|---|---|---|
Starter commutator end frame x Starter drive housing assembly (w/o Stop And Start System) |
4.8 N*m |
49 kgf*cm |
42 in.*lbf |
||||
Magnet starter switch assembly x Starter drive housing assembly (w/o Stop And Start System) |
7.0 N*m |
71 kgf*cm |
62 in.*lbf |
||||
Starter commutator end frame cover x Starter commutator end frame (w/o Stop And Start System) |
1.4 N*m |
14 kgf*cm |
12 in.*lbf |
||||
Lead wire x Terminal 30 (w/o Stop And Start System) |
8.0 N*m |
82 kgf*cm |
71 in.*lbf |
||||
Starter inrush current reduction relay x Starter drive housing assembly (for Transaxle CVT with Stop and Start System) |
7.9 N*m |
81 kgf*cm |
70 in.*lbf |
||||
Wire harness x Starter assembly (for Transaxle CVT with Stop and Start System) |
9.0 N*m |
92 kgf*cm |
80 in.*lbf |
||||
Lead wire x Terminal M (for Transaxle CVT with Stop and Start System) |
9.0 N*m |
92 kgf*cm |
80 in.*lbf |
||||
Starter commutator end frame assembly x Starter drive housing assembly (for Transaxle CVT with Stop and Start System and Transaxle M/T with Stop and Start System) |
6.0 N*m |
61 kgf*cm |
53 in.*lbf |
||||
Starter commutator end frame assembly x Starter brush holder assembly (for Transaxle CVT with Stop and Start System and Transaxle M/T with Stop and Start System) |
1.5 N*m |
15 kgf*cm |
13 in.*lbf |
||||
Magnet starter switch assembly x Starter drive housing assembly (for Transaxle CVT with Stop and Start System and Transaxle M/T with Stop and Start System) |
7.5 N*m |
76 kgf*cm |
66 in.*lbf |
||||
Lead wire x Terminal M (for Transaxle CVT with Stop and Start System) |
9.0 N*m |
92 kgf*cm |
80 in.*lbf |
||||
Lead wire x Terminal 30 (for Transaxle M/T with Stop and Start System) |
9.0 N*m |
92 kgf*cm |
80 in.*lbf |
||||
Starter assembly x CVT |
37 N*m |
377 kgf*cm |
27 ft.*lbf |
||||
Starter wire x Starter assembly |
9.8 N*m |
100 kgf*cm |
87 in.*lbf |
||||