PCV VALVE INSTALLATION

PROCEDURE

  1. INSTALL VENTILATION VALVE SUB-ASSEMBLY

    1. A092670E32

      Apply adhesive to 2 or 3 threads of the ventilation valve.

      Adhesive

      Toyota genuine adhesive 1324, three bond 1324 or equivalent

      Table 1. Text in Illustration

      *1

      Adhesive
    2. A155426

      Using a 22 mm ball joint lock nut wrench, install the ventilation valve.

      20 N*m

      204 kgf*cm

      15 ft.*lbf

      Note:

      Use the formula to calculate special torque values for situations where ball joint lock nut wrench is combined with a torque wrench (Click here).

  2. INSTALL INTAKE MANIFOLD

    1. Install the intake manifold (Click hereClick here).