PARKING BRAKE CABLE REMOVAL


  1. REMOVE REAR WHEEL

  2. REMOVE REAR BRAKE DRUM


    1. Release the parking brake lever, and remove the brake drum.

      B007WFIE01
      Text in Illustration
      *A for 295 mm Drum *B for 254 mm Drum

      Tech Tips

      If the brake drum cannot be removed easily, perform the following steps.

    2. Remove the hole plug and insert a screwdriver through the hole in the backing plate, and hold the automatic adjusting lever away from the adjuster.

    3. Using another screwdriver, contract the brake shoe adjuster by turning the adjusting wheel.

  3. REMOVE REAR AXLE BRAKE DRUM GASKET

  4. REMOVE AUTOMATIC ADJUST LEVER


    1. for 254 mm drum:


      1. B007SP7

        Remove the automatic adjust lever and the tension spring.

  5. SEPARATE PARKING BRAKE SHOE STRUT SET


    1. for 254 mm drum:


      1. B007PFFE01

        Using SST, remove the upper side tension spring from the brake shoe.

        SST
        09703-30011

    2. for 295 mm drum:


      1. B007OQVE01

        Using SST, remove the upper side tension spring from the brake shoe.

        SST
        09703-30011

  6. REMOVE FRONT BRAKE SHOE


    1. for 254 mm drum:


      1. B007Q43

        Using a needle-nose pliers, remove the anchor side tension spring.

      2. B007PWLE01

        Using SST, remove the cup, shoe hold-down sprig and pin.

        SST
        09718-00011
      3. B007RE0E02
        Text in Illustration
        *A LH Side
        *B RH Side

        Remove the parking brake shoe lower strut.

      4. Separate the brake shoe return spring, and remove the front brake shoe.

    2. for 295 mm drum:


      1. B007TGLE01

        Using SST, remove the cup, shoe hold-down sprig and pin.

        SST
        09718-00011

      2. Separate the brake shoe return spring, and remove the front brake shoe.

  7. REMOVE REAR BRAKE SHOE


    1. for 254 mm drum:


      1. B007RU0E01

        Using SST, remove the cup, shoe hold-down sprig and pin.

        SST
        09718-00011
      2. B007W9F

        Disconnect the parking brake cable No. 3 and remove the rear brake shoe.

    2. for 295 mm drum:


      1. B007W3ZE01

        Using SST, remove the cup, shoe hold-down sprig and pin.

        SST
        09718-00011

      2. Remove the tension spring.

      3. B007ORH

        Disconnect the parking brake cable No. 3 and remove the rear brake shoe.

  8. REMOVE PARKING BRAKE CABLE ASSEMBLY NO.3 (NARROW BODY)


    1. B007QN6

      Remove the 2 bolts and separate the parking brake cable assembly No.3 from the backing plate.

    2. Remove the 5 bolts, nut and parking brake cable assembly No.3.

      B007RN1

    3. Remove the parking brake cable assembly No.3 from the parking brake equalizer.

  9. REMOVE PARKING BRAKE CABLE ASSEMBLY NO.3 (WIDE BODY)


    1. B007QN6

      Remove the 2 bolts and separate the parking brake cable assembly No.3 from the backing plate.

    2. Remove the 6 bolts, nut and parking brake cable assembly No.3.

      B007RM1

    3. Remove the parking brake cable assembly No.3 from the parking brake equalizer.