STARTER (for 2.2 kW Type) REMOVAL


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE STARTER ASSEMBLY


    1. B007TYT

      Remove the No. 2 terminal cap.

    2. Disconnect the starter connector.

    3. Remove the nut and disconnect the starter wire.

    4. B007TYZ

      Remove the 2 bolts and disconnect the wiring harness clamp bracket.

    5. Remove the stater assembly.