ROOF HEADLINING DISASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE ROOF SPEAKER ASSEMBLY (for 24 Speakers, Front Side)

    Click here

  2. REMOVE TELEPHONE MICROPHONE ASSEMBLY

    Click here

  3. REMOVE ACTIVE NOISE CONTROL MICROPHONE

    Click here

  4. REMOVE ROOF SPEAKER GRILLE LH (for 24 Speakers)


    1. B006FR0

      Detach the claw and guide and remove the roof speaker grille LH.

  5. REMOVE ROOF SPEAKER GRILLE RH (for 24 Speakers)

    Tech Tips

    Use the same procedure described for the LH side.

  6. REMOVE MICROPHONE CASE LH (for 12 Speakers)


    1. B006GD4

      Detach the claw and remove the microphone case LH.

  7. REMOVE MICROPHONE CASE RH (for 12 Speakers)

    Tech Tips

    Use the same procedure described for the LH side.

  8. REMOVE ROOF SPEAKER ASSEMBLY (for 24 Speakers, Rear Side)

    Click here

  9. REMOVE REAR SPEAKER GRILLE (for 24 Speakers)


    1. B0069G6

      Detach the claw and guide and remove the rear speaker grille.

      Tech Tips

      Use the same procedure for the opposite side.

  10. REMOVE ROOF SIDE REGISTER BEZEL LH (w/ Rear Cooler)


    1. B006G3H

      Detach the claw and guide and remove the roof side register bezel LH.

  11. REMOVE ROOF SIDE REGISTER BEZEL RH (w/ Rear Cooler)

    Tech Tips

    Use the same procedure described for the LH side.

  12. REMOVE NO. 1 ROOF WIRE


    1. B006AARC01
      B006DHE Remove in this Direction

      Turn the visor connectors 90° counterclockwise and disconnect them from the roof headlining assembly.

    2. for LHD:


      1. Detach each clamp and each guide.

      2. Remove each tape and No. 1 roof wire from the roof headlining.

        B006AJCC01
        *A w/o Pre-collision *B w/ Pre-collision
        *C for 24 Speakers - -
        *1 No. 1 Roof Wire - -
        B006GBM Tape - -

    3. for RHD:


      1. Detach each clamp and each guide.

      2. Remove each tape and No. 1 roof wire from the roof headlining.

        B006GRPC01
        *A w/o Pre-collision *B w/ Pre-collision
        *C for 24 Speakers - -
        *1 No. 1 Roof Wire - -
        B006GBM Tape - -