PRE-CRASH SAFETY SYSTEM WARNING BUZZER INSTALLATION

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE

  1. INSTALL SKID CONTROL BUZZER (PRE-CRASH SAFETY SYSTEM WARNING BUZZER)

    1. Connect the connector.

    2. Attach the clamp to install the skid control buzzer (pre-crash safety system warning buzzer).

  2. INSTALL STEREO OPENING COVER (w/o Audio)

    Click here

  3. INSTALL RADIO RECEIVER ASSEMBLY (w/ Audio, for Radio Receiver Type)

    Click here

  4. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY (w/ Audio, for Radio and Display Type)

    Click here

  5. INSTALL TELLTALE LIGHT ASSEMBLY

    Click here

  6. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  7. INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  8. INSTALL CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL

    Click here

  9. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click hereClick hereClick here

  10. INSTALL BATTERY SERVICE COVER

    Click here

  11. INSTALL DECK BOARD ASSEMBLY

    Click here