TURN SIGNAL FLASHER ASSEMBLY(for RHD) ON-VEHICLE INSPECTION

PROCEDURE

  1. CHECK TURN SIGNAL FLASHER ASSEMBLY

    1. U123679E02

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      D106-7 (E) - Body ground

      Always

      Below 1 Ω

    2. Measure the voltage according to the value(s) in the table below.

      Standard Voltage

      Tester Connection

      Switch Condition

      Specified Condition

      D106-1 (IG) - D106-7 (E)

      Ignition switch ON

      11 to 14 V

      D106-2 (LR) - D106-7 (E)

      Hazard warning switch off

      Below 1 V

      Hazard warning switch on

      Alternates between 11 to 14 V and below 1 V

      (60 to 120 times per minute)

      D106-3 (LL) - D106-7 (E)

      Hazard warning switch off

      Below 1 V

      Hazard warning switch on

      Alternates between 11 to 14 V and below 1 V

      (60 to 120 times per minute)

      D106-4 (B) - D106-7 (E)

      Always

      11 to 14 V

      D106-5 (EL) - D106-7 (E)

      Ignition switch ON

      Headlight dimmer switch (turn left) off

      9 V or higher

      Ignition switch ON

      Headlight dimmer switch (turn left) on

      Below 1 V

      D106-6 (ER) - D106-7 (E)

      Ignition switch ON

      Headlight dimmer switch (turn right) off

      9 V or higher

      Ignition switch ON

      Headlight dimmer switch (turn right) on

      Below 1 V

      D106-8 (HAZ) - D106-7 (E)

      Hazard warning switch off

      9 V or higher

      Hazard warning switch on

      Below 1 V
      Table 1. Text in Illustration

      *1

      Component with harness connected

      (Turn Signal Flasher Assembly)

      If the result is not as specified, there may be a malfunction in the turn signal flasher.