STEREO COMPONENT AMPLIFIER INSTALLATION

PROCEDURE

1. INSTALL NO. 2 AMPLIFIER BRACKET

   1. Install the No. 2 amplifier bracket with the 2 screws.

      3.0 N*m

      31 kgf*cm

      27 in.*lbf

2. INSTALL NO. 1 AMPLIFIER BRACKET

   1. Install the No. 1 amplifier bracket with the 2 screws.

      3.0 N*m

      31 kgf*cm

      27 in.*lbf

3. INSTALL STEREO COMPONENT AMPLIFIER ASSEMBLY

   1. 

      *1

      Guide

      Attach the 2 guides to temporarily install the stereo component amplifier assembly with bracket.

   2. Install the stereo component amplifier assembly with bracket with the 3 bolts.

      Tip:

      Tighten the bolts in the order shown in the illustration.

      4.5 N*m

      46 kgf*cm

      40 in.*lbf

   3. Connect the connector.

4. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH

   Click here

5. INSTALL REAR SEAT ASSEMBLY

   1. for LH Side:

      Click here

   2. for RH Side:

      Click here

6. INSTALL REAR NO. 1 FLOOR MAT SUPPORT SIDE PLATE

   Click here

7. INSTALL REAR FLOOR FINISH PLATE (w/o Spare Tire, for Compact Spare Tire)

   Click here

8. INSTALL REAR DECK TRIM COVER (for Full Size Spare Tire)

   Click here

9. INSTALL DECK BOARD ASSEMBLY

   Click here

10. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    Click here

11. INSTALL PACKAGE TRAY TRIM POCKET SUB-ASSEMBLY (w/ Partition Net)

    Click here

12. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH

    Click here

13. INSTALL REAR DOOR SCUFF PLATE RH

    Click here