STEERING LOCK SYSTEM


  1. FUNCTION OF MAIN COMPONENTS


    1. The main components of the steering lock control system are as follows:

      Component Function
      Steering Lock Actuator Assembly Steering Lock ECU Receives the steering wheel unlock/lock request signal from the certification ECU (smart key ECU assembly) and activates the steering lock motor.
      Certification ECU (Smart Key ECU Assembly)

      • Certifies the electrical key transmitter sub-assembly.

      • Transmits each power supply signal for the lock/unlock motor to the steering lock ECU (steering lock actuator assembly).
      Engine Switch Transmits the engine switch signal to the certification ECU (smart key ECU assembly).
      Combination Meter Assembly Master Warning Light Blinks to warn the driver in accordance with signals from the steering lock control system.
      Buzzer Sounds to warn the driver of a malfunction in the system.
      Multi-information Display Displays a warning message to inform the driver of a malfunction in the system.

  2. FUNCTION


    1. The steering lock actuator assembly is integrated into the steering lock ECU, and the ECU controls the lock bar operation in the steering lock actuator assembly through the control of the lock/unlock motor.

    2. The steering lock ECU detects the position (lock/unlock) of the lock bar and transmits this information to the certification ECU (smart key ECU assembly).

    3. In this system, the certification ECU (smart key ECU assembly) determines whether to lock or unlock the steering based on communication. Then, the certification ECU (smart key ECU assembly) sends lock or unlock command signals to the steering lock ECU via LIN communication. Upon receiving the signals, the steering lock ECU operates the lock/unlock motor to lock or unlock the steering.

      Tech Tips

      It is not possible to replace only the steering lock ECU in the steering lock actuator assembly. Therefore, if the ECU is malfunctioning, the entire steering lock assembly must be replaced.