CAMSHAFT POSITION SENSOR INSTALLATION

PROCEDURE

1. INSTALL CAMSHAFT POSITION SENSOR

   1. Apply a light coat of engine oil to the O-ring of the camshaft position sensor.

      Note:

      • When reusing the camshaft position sensor, inspect the O-ring.

      • Make sure that the O-ring is not cracked or jammed when installing the camshaft position sensor.

   2. Using an E6 "TORX" socket wrench, install the camshaft position sensor with the bolt.

      3.6 N*m

      37 kgf*cm

      32 in.*lbf

   3. Connect the camshaft position sensor connector.

2. INSTALL ENGINE COVER

3. INSTALL NO. 1 ENGINE COVER

   Click here