FUEL SENDER GAUGE ASSEMBLY INSPECTION

PROCEDURE

  1. INSPECT FUEL SENDER GAUGE ASSEMBLY

    A209232C01

    *1

    F (Upper)

    *2

    1/2

    *3

    E (Lower)

    *a

    Component without harness connected

    (Fuel Sender Gauge Assembly)

    1. Check that the float moves smoothly between F and E.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      1 - 2

      Float level is F (upper)

      13.5 to 16.5 Ω

      1 - 2

      1/2

      200.3 to 224.7 Ω

      1 - 2

      Float level is E (lower)

      405.5 to 414.5 Ω

      If the result is not as specified, replace the fuel sender gauge assembly.