1ND-TV ENGINE CONTROL SERVICE DATA
Diesel throttle body assembly |
Standard resistance |
1 (M-) - 2 (M+) |
0.3 to 100 Ω at 20°C (68°F) |
Accel sensor out No. 1 |
Standard voltage |
Accelerator pedal is released |
0.5 to 1.1 V |
Accelerator pedal is fully depressed |
2.6 to 4.5 V |
||
Accel sensor out No. 2 |
Standard voltage |
Accelerator pedal is released |
1.2 to 2.0 V |
Accelerator pedal is fully depressed |
3.4 to 4.75 V |
||
Mass air flow meter |
Standard resistance |
4 (THA) - 5 (E2) |
12.5 to 16.9 kΩ at -20°C (-4°F) |
2.19 to 2.67 kΩ at 20°C (68°F) |
|||
0.50 to 0.68 kΩ at 60°C (140°F) |
|||
No. 1 crank position sensor (w/o Stop and start system) |
Standard resistance |
1 - 2 |
835 to 1400 Ω at Cold |
1060 to 1645 Ω at Hot |
|||
Crank position sensor |
Standard resistance |
1(Ne+) - 2(Ne-) |
1630 to 2740 Ω at Cold |
2065 to 3225 Ω at Hot |
|||
Engine coolant temperature sensor |
Standard resistance |
1(E2) - 2(THW) |
2.32 to 2.59 kΩ at 20°C (68°F) |
0.310 to 0.326 kΩ at 80°C (176°F) |
|||
Intake air temperature sensor |
Standard resistance |
1 - 2 |
2.21 to 2.65 kΩ at Approximately 20°C (68°F) |
0.55 to 0.61 kΩ at Approximately 60°C (140°F) |
|||
Diesel turbo pressure sensor |
Standard voltage |
3 (VC) - 1 (E2) |
4.5 to 5.5 V at Ignition switch ON |
Air fuel ratio sensor |
Standard resistance |
5 (H-) - 2 (+B) |
2 to 5 Ω at 20°C (68°F) |
5 (H-) - 4 (AF1+) |
10 kΩ or higher |
||
EFI-MAIN relay |
Standard resistance |
3 - 5 |
10 kΩ or higher (Battery voltage not applied to terminals 1 and 2) |
Below 1 Ω (Battery voltage applied to terminals 1 and 2) |
|||
EFI-MAIN NO. 2 relay |
Standard resistance |
3 - 5 |
10 kΩ or higher (Battery voltage not applied to terminals 1 and 2) |
Below 1 Ω (Battery voltage applied to terminals 1 and 2) |
|||
IG2 relay |
Standard resistance |
3 - 5 |
10 kΩ or higher (Battery voltage not applied to terminals 1 and 2) |
Below 1 Ω (Battery voltage applied to terminals 1 and 2) |