NAVIGATION SYSTEM / MULTI INFORMATION SYSTEM


  1. FUNCTION


    1. Navigation Screen


      1. The navigation computer calculates the present position and direction of travel, then determines a route and calculates the driving distance based on the following information sources:


        • - Map data in the HDD

        • - Global Positioning System (GPS) satellites

        • - Built-in gyro sensor

        • - Vehicle speed signal

        • - Reverse signal

        • - Parking brake signal

        • - Radio Data System Traffic Message Channel (RDS-TMC) and Transport Protocol Experts Group (TPEG) Signals*1

        • - Radio Data System Traffic Message Channel (RDS-TMC) Signal*2


        • *1: Models for Europe

        • *2: Models for Australia

      2. The functions of the navigation screen are listed below.

        Item Function
        Map Display Linear Touch Scroll Enables smooth scrolling by connecting the touch points on the screen.
        Map Color Change Depending on the position of the light control switch, the screen changes to day mode or night mode.
        Taillight-interlocked Map Color Change Changes the color of the map screen that is displayed when the taillights are turned on.
        North Up / Heading Up

        • If North Up is selected, regardless of the direction of vehicle travel, north is always up.

        • If Heading Up is selected, the direction of vehicle travel is always up.
        3D Display Displays a 3-dimensional (3D) view of the map.
        Multi-step Scale Display Changes the map scale in 14 steps.
        Direct Scale Change Directly selects and displays the map scale.
        Street Name Indication on Scrolled Map Displays the street name and city name even when the map screen is being scrolled.
        Stepless Scale Display Changes the scale of the map from the basic 14 steps to an even finer range of scales.
        Road Number Sign Board Display Displays the road number on the map.
        Point of Interest Display Displays selected types of points of interest as marks on the map.
        Home Screen Display*1 Displays different modes on a screen that is split into 3 views.
        Split-view Display*2 Displays different modes on a screen that is split into 2 views.
        Compass Mode Screen Displays the direction of travel and detailed data of the present location.
        Route Guidance Demonstration Demonstrates the route guidance to the destination.
        Route Trace It is possible to store up to the last 124 miles (200 km) of a traveled route and retrace the route on the display.
        RDS-TMC and TPEG Service Information Display*1 Displays the traffic icons, arrows and indicators when RDS-TMC or TPEG service information is being received.
        RDS-TMC Display*2 Displays RDS-TMC icons, arrows and indicators when RDS-TMC service is being received.
        Destination Search Preset Destination Memory Search Sets a pre-registered point as a destination point while driving.
        Address Search

        A destination can be set in 2 ways:*1


        • Information can be entered in the order of: street name, town and house number.

        • Information can be entered in the order of: town, street name and house number.

        A destination can be set in 2 ways:*2


        • Information can be entered in the order of: street name, city and house number.

        • Information can be entered in the order of: city, street name and house number.
        Hybrid Point of Interest Search Narrows the search by names of the point of interest, category and areas.
        Online Search*1 Allows use of an internet search engine to set a destination using the most up to date information.
        Previous Destination Search Stores the coordinates, names, and date of up to 100 locations that have been set as destinations in the past.
        Memory Point Search Sets a destination from the registered memory point.
        Intersection Search By specifying 2 streets, the point at which they intersect is set as the destination point.
        Motorway Entrance or Exit Search Searches for the destination by the name of the street that connects to a motorway entrance or exit.
        Map Search A destination can be set by scrolling the cursor on the map.
        Coordinate Search A destination can be input by entering its coordinates.
        Voice-recognition Search A destination can be set up by voice command input.
        Phone Number Search*1 A destination can be input by entering its phone number.
        Route Search Multiple Destination Setting Sets multiple destinations. It can also rearrange the sequence of the destinations.
        Multiple Route Search Searches for multiple routes.
        Search Condition Designation Searches for quick 1, quick 2, or short routes.
        Detour Search Changes the route to detour around a section of the route.
        Regulated Road Consideration Performs searches which consider regulated roads.
        Avoidance Area Searches for a route that avoids a designated area.
        Adjacent Road Search*2 Searches for a route adjacent to the current road.
        Avoid Traffic Search Automatically changes to another route to avoid heavy congestion.
        Guidance Voice Guidance Provides voice guidance about the distance and the direction of travel to a destination point based on road conditions and vehicle speed.
        Next Turn Guidance Provides guidance about the distance to the next turn and indicates the direction of the turn using an arrow.
        Motorway Mode Display Displays the distance to the next junction and exit, or POIs in the vicinity of the motorway exit.
        Motorway Direction of Travel Display Displays the direction of travel to take on the motorway.
        Intersection Zoom-in Display Zooms in the image when approaching an intersection.
        Turn List Display Displays a turn list on the right side of the 2-screen display.
        Arrow (Turn-by-Turn) Display Displays the direction of the next turn and the distance to the turn on the right side of the 2-screen display.
        Distance-to-destination Display Displays the distance from the present location to the destination.
        Estimated Arrival Time Display Displays estimated arrival time.
        Others Voice Recognition Recognizes pre-programmed system commands spoken to operate the navigation system.

        • *1: Models for Europe

        • *2: Models for Australia

    2. Information Screen


      1. The functions of the information screen display are listed below.

        Item Outline
        Fuel Consumption*1 Information about fuel consumption per minute or per trip can be displayed.
        Traffic Information*2 By receiving the RDS-TMC and TPEG service, a list of the current traffic incidents is displayed along with information on the incident's distance and position relative to the vehicle.
        Traffic Incidents*2 By receiving the TPEG service, the traffic prediction information around the current vehicle position or map display cursor position can be displayed.
        Parking information*2 By receiving the TPEG service, the location, fee and vacancy status of the parking lots can be displayed.
        Information provider's logo*2 Displayed when receiving traffic information, traffic prediction information or parking lots information.

        • *1: Models for Australia

        • *2: Models for Europe

      2. The fuel consumption screen is displayed as illustrated below. This screen has the display functions listed below.

        A00518FE02
        Item Outline
        (1) Clear Switch Clears all past information.
        (2) Average Speed Displays the value that has been calculated by the combination meter sub-assembly, which is based on the distance driven and time elapsed since the power switch is turned on (IG).
        (3) Elapsed Time Displays the value that has been calculated by the combination meter sub-assembly, which is based on the time elapsed since the power switch is turned on (IG).
        (4) Cruising Range Displays the approximate drivable distance.
        (5) Energy Switch Displays the energy monitor.
        (6) Average Per Minute Fuel Consumption

        • Displays the value that has been calculated by the combination meter sub-assembly, which is based on the driven distance and the volume of fuel consumed (fuel injection signal), provided that the power switch is on (IG).

        • Displays the average fuel consumption for the last minute, or since clear was last selected.
        (7) Recovered Energy

        • Indicates the recovered energy for 1 minute with "E" symbols.

        • The recovered energy status is calculated by the power management control ECU.
        (8) Current Per Minute Fuel Consumption Displays the instantaneous (current) fuel consumption value that has been calculated by the combination meter sub-assembly, which is based on the driven distance and the volume of fuel consumed (fuel injection signal), provided that the power switch is on (IG).
        (9) Energy Monitor

        Indicates the energy transmission direction, making it possible to confirm the current drive method (engine, motor or both), the power generation status by the engine and status of regenerative energy use.


        • The State Of Charge (SOC) of the battery can be checked on the meter. The meter shows the SOC in 8 levels.

        • Displays the energy monitor status that has been calculated by the power management control ECU.
        (10) Fuel Consumption Switch Changes to the trip information screen.

    3. Setup Screen


      1. The settings for the functions of the multi-display are available from the setup screen.

        Item Function
        Display Settings

        • Map Menu and Camera screen adjustment

        • Depending on the position of the headlight switch, the screen changes to day or night mode.
        General Settings

        • Time zones and the on/off setting of daylight saving time can be changed.

        • The language can be selected.*1

        • The voice recognition language can be selected.*1

        • The home screen display can be changed.*1

        • The beep sound can be turned off.

        • Automatic return from the audio screen to the map screen after audio operation can be changed.

        • The color of the screen buttons can be changed.

        • Distance unit can be changed.*1

        • Registered information (personal data) can be cleared.

        • Navigation system program can be updated.*1
        Voice Settings

        • The voice guidance volume can be adjusted or switched off.

        • Voice recognition talkback can be set.

        • Voice guidance while using the audio system can be set.

        • Voice guidance during route guidance can be set.
        Navigation Settings

        The Navigation Settings can be used to:


        • Set detailed online search settings such as:*1


          • Synchronized settings of the online search portal site and navigation system

          • Pop-up message display during online search

          • Automatic accumulated data downloading settings from the portal site

          • Roaming pop-up message settings

          • Memorization settings of the user name and password used when connecting to the portal site

          • Search engine settings of the online search

          • Deletion of the online search history

          • Change of the user name and password used when connecting to the portal site

          • Deletion of the user name and password used when connecting to the portal site

        • Set detailed navigation settings such as average cruising speed

        • Buttons displayed on the map screen when "OFF" is selected*2

        • Set detailed navigation settings such as displayed POI icon categories

        • Set detailed navigation settings such as display of 3D landmarks*1

        • Displaying the speed limit of the road currently being used can be set*1

        • The function that magnifies the map scale as the vehicle approaches a guidance point can be set*1

        • Set the cautionary message display shown when a regulated street is included in the route

        • Set the display of pop-up information

        • Set the railroad crossing advisory*2

        • Set the high accident location guidance*2

        • Manual adjustment of the current vehicle position mark
        Vehicle Settings

        • Settings can be changed for the following maintenance items:


          • Reminder

          • Engine oil

          • Oil filter

          • Rotation

          • Tires

          • Battery

          • Brake pad

          • Wipers

          • Coolant

          • Brake oil

          • Trans. fluid

          • Service

          • Air filter

          • Personal

          • Set dealer

        • Customizable vehicle settings can be changed.
        Telephone Settings

        • Phone sound settings can be changed:


          • Call Volume

          • Ring Tone Volume

          • Ring Tone

        • Phonebook settings can be changed:


          • Manage Contacts

          • Manage Speed Dials

          • Delete Call History

        • Message function settings can be changed*1:


          • Message forwarding from cellular phones

          • New message notification display

          • New message voice notification

          • Adjust the new message notification volume

          • Select a new message voice notification tone

          • Automatic message read out

          • Adjust the message read out volume

          • Cellular phone's read and unread status update

          • Edit "Quick Reply messages"

        • Phone display settings can be changed:


          • Change the incoming call display

          • Display of the automatic phonebook transfer completion message (For PBAP compatible models)

          • Display of the automatic call history transfer completion message (For PBAP compatible models)

          • Display of images during calls (For PBAP compatible models)

          • Orientation of images displayed during calls (For PBAP compatible models)
        Bluetooth Settings

        • Bluetooth device registration settings can be changed:


          • Register a Bluetooth device

          • Delete the Bluetooth device

          • Edit the Bluetooth device

        • Bluetooth devices can be selected

        • Bluetooth device settings can be changed:


          • Automatic connection to a Bluetooth device

          • Change to a desired Bluetooth device name

          • Edit the Bluetooth device passcode

          • Display Bluetooth device connection status

          • Bluetooth DUN profile settings*1
        Audio Settings

        • Sound quality can be adjusted.

        • Radio setting can be changed:


          • Automatically seek an FM station that regularly broadcasts traffic information and the station broadcasts

          • An FM station providing good reception is automatically selected if current reception worsens.

          • Switching over to a broadcasting station within the same local program network.

          • A station providing good reception is automatically selected if current reception worsens.*2

        • iPod setting can be changed:


          • Display cover art when a song stored in an iPod is being played.
        Traffic and Parking Settings*1

        • The voice guidance for traffic information can be switched off.

        • Traffic information icons can be displayed on the map.

        • Detour route function can be selected.

        • When searching for a route, a detoured route search that avoids traffic jams and so forth can be set.

        • When searching for a route, a detoured route search that avoids predicted traffic jams and so forth can be set.

        • The stations can be selected.

        • Traffic information can be set to be received automatically, or to receive RDS-TMC traffic information only.

        • Parking icons can be displayed on the map.
        Traffic Information Settings*2

        • The voice guidance for traffic information can be switched off.

        • Traffic information icon display can be set.

        • Detour route function can be selected.

        • The stations can be selected.

        • *1: Models for Europe

        • *2: Models for Australia

  2. DIAGNOSIS


    1. For details on the procedure required to enter the Service Menu screen, refer to the Repair Manual.