DRIVE SHAFT SYSTEM


  1. OUTLINE


    1. Front Drive Shaft


      1. The front drive shaft assembly uses a tripod type Constant Velocity (CV) joint on the differential side, and a Rzeppa type CV joint on the front axle side.

      2. A front drive shaft damper is provided to reduce vibration and noise.

        A01R1W2C02
        *1 Front Drive Shaft Assembly LH *2 Front Drive Shaft Assembly RH
        *3 Front Drive Shaft Damper LH *4 Front Drive Shaft Damper RH
        *a Rzeppa Type CV Joint *b Tripod Type CV Joint
        B00807K Front Axle Side B00806U Differential Side

    2. Rear Drive Shaft


      1. The rear drive shaft assembly uses a double-offset type Constant Velocity (CV) joint on the differential side, and a Rzeppa type CV joint on the rear axle side. Straight-line stability has been ensured by making the shafts of the left and right rear drive shaft assemblies the same length.

        A01R2JWC02
        *1 Rear Drive Shaft Assembly - -
        *a Double-offset Type CV Joint *b Rzeppa Type CV Joint
        B00807K Differential Side B00806U Rear Axle Side