PANORAMIC VIEW MONITOR SYSTEM, Diagnostic DTC:C2A5D

DTC Code DTC Name
C2A5D BSM Buzzer Malfunction

DESCRIPTION

This DTC is stored when the rear television camera assembly receives an RCTA buzzer circuit malfunction signal from the blind spot monitor sensor RH.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from
C2A5D BSM Buzzer Malfunction The RCTA buzzer circuit is abnormal. Blind spot monitor system Rear television camera assembly

CAUTION / NOTICE / HINT

Note


  • When "!" is displayed on the radio and display receiver assembly after the cable is disconnected from the negative (-) battery terminal, correct the steering angle neutral point.

    Click here

  • Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the panoramic view monitor system may be needed.

    Click here

PROCEDURE


  1. CHECK FOR DTC


    1. Clear the DTCs.

      Click here


      Chassis > Parking Assist Camera > Clear DTCs

    2. Recheck for DTCs and check that no DTCs are output.

      Click here


      Chassis > Parking Assist Camera > Trouble Codes
      Result
      Result Proceed to
      DTC C2A5D is output A
      DTC C2A5D is not output B

    B

    REPLACE REAR TELEVISION CAMERA ASSEMBLY Click here

    A

  2. CHECK FOR DTC (BLIND SPOT MONITOR SYSTEM [C1ABE])


    1. Check for DTCs.


      Body Electrical > Blind Spot Monitor Slave > Trouble Codes
      Result
      Result Proceed to
      DTC C1ABE is output A
      DTC C1ABE is not output B

    A

    GO TO DIAGNOSTIC TROUBLE CODE CHART (C1ABE) Click here

    B

    GO TO BLIND SPOT MONITOR SYSTEM (PROBLEM SYMPTOMS TABLE) Click here