HEIGHT CONTROL OFF SWITCH INSTALLATION

PROCEDURE

1. INSTALL COMBINATION SWITCH ASSEMBLY (HEIGHT CONTROL OFF SWITCH)

   1. Install the combination switch (height control off switch) with the 4 screws.

2. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY

   Click hereClick here

3. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

   Click hereClick here

4. INSTALL INSTRUMENT PANEL FINISH PANEL END LH

   Click hereClick here

5. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

   Click hereClick here

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click hereClick hereClick hereClick hereClick here).

7. INSPECT SUSPENSION CONTROL SYSTEM

   1. Inspect the suspension control system (Click hereClick here).