FRONT AIRBAG SENSOR ON-VEHICLE INSPECTION

PROCEDURE

1. CHECK FRONT AIRBAG SENSOR LH (VEHICLE NOT INVOLVED IN COLLISION AND AIRBAG NOT DEPLOYED)

   1. Perform a diagnostic system check (Click hereClick here).

2. CHECK FRONT AIRBAG SENSOR LH (VEHICLE INVOLVED IN COLLISION AND AIRBAG NOT DEPLOYED)

   1. Perform a diagnostic system check (Click hereClick here).

   2. If the front fender of the vehicle or its periphery are damaged, perform a visual check:

      • Check for cracks, dents or chips in the case.

      • Check for cracks, dents, chips and scratches in the connector.

      • Check for peeling of the label or damage of the serial number.

      • If any of the defects mentioned above are present, replace the front airbag sensor with a new one.

3. CHECK FRONT AIRBAG SENSOR LH (VEHICLE INVOLVED IN COLLISION AND AIRBAG DEPLOYED)

   1. Replace the front airbag sensor.

      CAUTION:

      For removal and installation of the front airbag sensor, be sure to follow the correct procedures.

      Tip:

      If the airbags have deployed, replace the front airbag sensor on the side in which the collision occurred. Replace both if necessary.