VEHICLE STABILITY CONTROL SYSTEM, Diagnostic DTC:C1433

DTC Code DTC Name
C1433 Steering Angle Sensor Internal Circuit

DESCRIPTION

This DTC is stored when the skid control ECU (brake actuator assembly) receives an internal malfunction signal from the steering angle sensor.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

Note

C1433

Steering Angle Sensor Internal Circuit

With the +BS terminal voltage between 9.6 and 16.5 V, a steering angle sensor malfunction signal is received from the steering angle sensor.

Steering angle sensor (spiral cable sub-assembly)

Tire pressure warning light (w/ tire pressure warning system) is off.

PROCEDURE

  1. REPLACE SPIRAL CABLE SUB-ASSEMBLY

    1. Replace the steering angle sensor (spiral cable sub-assembly).

      Click here

      Tip:

      If troubleshooting has been carried out according to Problem Symptoms Table, refer back to the table and proceed to the next step before replacing parts.

      Click hereClick here

    Result

    Proceed to

    NEXT
    NEXT

    END