POWER DOOR LOCK CONTROL SYSTEM PROBLEM SYMPTOMS TABLE

Note


  • If the body ECU has been replaced, it is necessary to initialize the body ECU.*1

    Click here

  • As the door control battery is installed between the vehicle battery and body ECU, first perform the inspections to confirm that there are no malfunctions in the power source circuit for the body ECU before performing this troubleshooting procedure.*2

    Click here


    • *1: w/ Automatic Light Control System

    • *2: w/ Door Control Battery

Tech Tips


  • Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

  • Inspect the fuses and relays related to this system before inspecting the suspected areas below.

Power Door Lock Control System (All Doors)
Symptom Suspected Area Link
All doors LOCK/UNLOCK functions do not operate via power window regulator master switch assembly or door key cylinder Proceed to "All Doors LOCK/UNLOCK Functions do not Operate Via Power Window Regulator Master Switch Assembly or Door Key Cylinder"

Click here

All doors LOCK function does not operate via power window regulator master switch assembly and door key cylinder Harness or connector -
D/L NO.1 relay*1

Click here

D/L NO.2 relay*1

Click here

Instrument panel junction block assembly*3

Click here

Instrument panel junction block assembly*4

Click here

Body ECU*3

Click here

Body ECU*4

Click here

All doors UNLOCK function does not operate via power window regulator master switch assembly and door key cylinder Harness or connector -
D/L NO.1 relay*1

Click here

D/L NO.2 relay*1

Click here

Instrument panel junction block assembly*3

Click here

Instrument panel junction block assembly*4

Click here

Body ECU*3

Click here

Body ECU*4

Click here

All doors LOCK/UNLOCK functions do not operate*1 Proceed to "Power Source Circuit"

Click here

All doors LOCK/UNLOCK functions do not operate*2 Harness or connector -
Instrument panel junction block assembly*3

Click here

Instrument panel junction block assembly*4

Click here

Body ECU*3

Click here

Body ECU*4

Click here


Power Door Lock Control System (Each Door)
Symptom Suspected Area Link
Only driver door LOCK/UNLOCK functions do not operate Front door lock assembly LH*2

Click here

Front door lock assembly RH*3

Click here

Harness or connector -
Only front passenger door LOCK/UNLOCK functions do not operate Front door lock assembly RH*2

Click here

Front door lock assembly LH*3

Click here

Harness or connector -
Only rear door LH LOCK/UNLOCK functions do not operate*1 Rear door lock assembly LH

Click here

Harness or connector -
Only rear door RH LOCK/UNLOCK functions do not operate*1 Rear door lock assembly RH

Click here

Harness or connector -

Power Door Lock Control System (Functions)
Symptom Suspected Area Link
Lock operation continues even after doors have been locked*1 Front door lock assembly LH

Click here

Front door lock assembly RH

Click here

Rear door lock assembly LH*5

Click here

Rear door lock assembly RH*5

Click here

Harness or connector -
Body ECU*6

Click here

Body ECU*7

Click here

Speed-sensitive automatic door lock function does not operate (meter / gauge system operates normally)*2 Proceed to "Customize Parameters"

Click here

Harness or connector -
Combination meter assembly

Click here

Body ECU*6

Click here

Body ECU*7

Click here

Driver door-linked automatic door unlock function does not operate*2 Proceed to "Customize Parameters"

Click here

Body ECU*6

Click here

Body ECU*7

Click here

Key lock-in prevention function does not operate*3 Unlock warning switch assembly

Click here

Harness or connector -
Body ECU*6

Click here

Body ECU*7

Click here

Collision door lock release function does not operate*2 Proceed to "Collision Door Lock Release Function does not Operate"

Click here