FEATURES

Parking Assist / Monitoring

1. Intelligent Clearance Sonar System

   
   

   1. This system performs driving torque restriction control or brake control while parking or traveling at low speeds and there is an obstacle in front of or behind the vehicle in order to avoid a collision or reduce the impact of a collision.

      Figure 1. Intelligent Clearance Sonar System

      

2. LEXUS Parking Assist-sensor System

   
   

   1. The LEXUS parking assist-sensor system uses ultrasonic sensors and is equipped with a beeping alarm. The system can detect obstacles at the front or rear of the vehicle, and provide information to the driver regarding the distance.

3. Parking Assist Monitor System

   
   

   1. To assist the driver in parking the vehicle by monitoring the area behind it, the parking assist monitor system has a rear television camera assembly mounted on the back door.

4. Blind Spot Monitor System

   
   

   1. The blind spot monitor system performs 2 functions using the same blind spot monitor sensors: blind spot monitor function and RCTA (Rear Cross Traffic Alert*1/Rear Crossing Traffic Alert*2) function.

      *1: Except models for Europe

      *2: Models for Europe

      

      *1	Blind Spot Monitor Sensor LH	*2	Blind Spot Monitor Sensor RH
      *3	Outer Rear View Mirror Assembly LH	*4	Outer Rear View Mirror Assembly RH
      *a	Outer Rear View Mirror Indicator Light	-	-
      	Detection Area (for Vehicle in Blind Spot)		Detection Area (for Rapidly Approaching Vehicle from Behind)

   2. If the RCTA function detects a vehicle approaching from the right or left at the rear of the vehicle while the driver is reversing in a parking lot, the function alerts the driver by sounding the RCTA buzzer (blind spot monitor buzzer) and flashing the outer rear view mirror indicator light to provide information for the driver, supporting decision making.

      

      *a	This Vehicle	*b	Target Vehicle
      	Detection Area	-	-

5. Panoramic View Monitor System

   
   

   • A panoramic view monitor system is provided which can assist with confirming the conditions around the vehicle, driving at low speeds, and driving during parking by displaying a panoramic view image on the navigation receiver assembly. The panoramic view image is created by seamlessly combining images from each television camera assembly installed on the front, rear, left and right sides of the vehicle.

     

     *1	Combines Video Signals from Each Television Camera Assembly
     *2	Displays Overhead View of Vehicle

     The illustration shown is an example only. The illustration may differ from the actual vehicle screen.

Lighting (Exterior)

1. Daytime Running Light

   
   

   1. The daytime running light system is designed to automatically illuminate the Light Emitting Diode (LED) lights during the daytime to keep the vehicle highly visible to other vehicles.

2. Cornering Light System

   
   

   1. The cornering light system ensures that visibility is maintained while turning corners.

3. Light Automatic Turn-off System

   
   

   1. The light automatic turn-off system is provided.

      The light auto turn-off system is used to prevent the driver from leaving the vehicle with the headlights, front fog lights*, parking lights, rear side marker lights, taillights or license plate lights on.

   Tech Tips

   *: Models with front fog light

4. Outside Handle Illumination System

   
   

   1. The outside handle light system operates the outside handle lights to ensure visibility when approaching or leaving the vehicle at night.

5. Automatic Headlight Beam Level Control System

   
   

   1. When the vehicle is stopped with the engine and headlights on, the automatic headlight beam level control system operates the headlight leveling motors in accordance with movement of the vehicle.

6. Automatic Light Control System

   
   

   1. When the light control switch is in the AUTO position, the automatic light control sensor detects the ambient light level and automatically turns the headlights, taillights, parking lights, side marker lights and license plate lights on or off accordingly.

7. Automatic High Beam System

   
   

   1. The automatic high beam system detects lights in front of the vehicle and automatically changes between high beams and low beams to support the driver during night driving.

8. Adaptive High Beam System

   
   

   1. By using the forward recognition camera to detect the lights of preceding and oncoming vehicles and subsequently optimizing the illumination area of the headlights accordingly, visibility is enhanced and the demands on the driver is reduced as they do not need to constantly switch between high beam and low beam.

      

      *a	Adaptive High Beam System OFF	*b	Adaptive High Beam System ON
      *c	Area Illuminated by High Beams	*d	Area Illuminated by Low Beams

9. Welcome Light Illumination System

   
   

   1. The welcome light illumination system operates the parking lights, taillights and license plate lights in conjunction with the locking and unlocking of the doors, ensuring nighttime usability.

10. Follow Me Home System (Models for Europe)

    
    

    1. The follow me home system turns on the headlights (low beams) when the vehicle is parked in order to ensure visibility at night.

11. Lane Change Flasher System

    
    

    1. The lane change flasher system flashes the turn signal light a certain number of times when the turn signal switch (headlight dimmer switch assembly) is moved to the lane change position. By using the lane change flasher system when changing lanes, it is no longer necessary to hold the turn signal switch in the lane change position.