REVOLUTION SENSOR INSTALLATION

PROCEDURE

1. INSTALL TRANSMISSION REVOLUTION SENSOR (NOUT)

   1. Apply Toyota Genuine CVT Fluid FE to a new O-ring.

   2. Install the O-ring to the transmission revolution sensor (NOUT).

   3. Install the transmission revolution sensor (NOUT) to the rear transaxle case with the bolt.

      5.4 N*m

      55 kgf*cm

      48 in.*lbf

   4. Connect the transmission revolution sensor (NOUT) connector.

2. INSTALL TRANSMISSION REVOLUTION SENSOR (NIN)

   1. Apply Toyota Genuine CVT Fluid FE to a new O-ring.

   2. Install the O-ring to the transmission revolution sensor (NIN).

   3. Install the transmission revolution sensor (NIN) to the transaxle case with the bolt.

      5.4 N*m

      55 kgf*cm

      48 in.*lbf

   4. Connect the transmission revolution sensor (NIN) connector.

3. INSTALL REAR ENGINE UNDER COVER LH (for 1ZR-FAE)

   Click hereClick here

4. INSTALL REAR ENGINE UNDER COVER LH (for 8NR-FTS)

   Click hereClick hereClick here

5. INSTALL NO. 1 ENGINE UNDER COVER (for 1ZR-FAE)

   Click hereClick here

6. INSTALL NO. 1 ENGINE UNDER COVER (for 8NR-FTS)

   Click hereClick hereClick here

7. CHECK DATA LIST (for 1ZR-FAE)

   Click here

8. CHECK DATA LIST (for 8NR-FTS)

   Click here