STARTER(for Transaxle CVT with Stop and Start System) COMPONENTS

*1	FLYWHEEL HOUSING SIDE COVER	*2	NO. 1 ENGINE UNDER COVER
*3	STARTER ASSEMBLY	*4	TERMINAL CAP PROTECTOR
*5	TERMINAL CAP	-	-
	Nm (kgfcm, ft.*lbf): Specified torque	-	-

*1	MAGNET STARTER SWITCH ASSEMBLY	*2	PLANETARY GEAR
*3	STARTER ARMATURE ASSEMBLY	*4	STARTER ARMATURE PLATE
*5	STARTER BRUSH HOLDER ASSEMBLY	*6	STARTER CENTER BEARING CLUTCH SUB-ASSEMBLY
*7	STARTER COMMUTATOR END FRAME ASSEMBLY	*8	STARTER INRUSH CURRENT REDUCTION RELAY
*9	STARTER YOKE ASSEMBLY	*10	WIRE HARNESS
*11	RUBBER SEAL	*12	STARTER DRIVE HOUSING ASSEMBLY
*13	HARNESS	*14	PINION DRIVE LEVER
	Nm (kgfcm, ft.*lbf): Specified torque		High-temperature grease

*1

MAGNET STARTER SWITCH ASSEMBLY

*2

PLANETARY GEAR

*3

STARTER ARMATURE ASSEMBLY

*4

STARTER ARMATURE PLATE

*5

STARTER BRUSH HOLDER ASSEMBLY

*6

STARTER CENTER BEARING CLUTCH SUB-ASSEMBLY

*7

STARTER COMMUTATOR END FRAME ASSEMBLY

*8

STARTER INRUSH CURRENT REDUCTION RELAY

*9

STARTER YOKE ASSEMBLY

*10

WIRE HARNESS

*11

RUBBER SEAL

*12

STARTER DRIVE HOUSING ASSEMBLY

*13

HARNESS

*14

PINION DRIVE LEVER

N*m (kgf*cm, ft.*lbf): Specified torque

High-temperature grease