EXHAUST PIPE (for Super Long Wheelbase) REMOVAL


  1. REMOVE EXHAUST PIPE ASSEMBLY FRONT


    1. w/ Secondary air injection system:


      1. Disconnect the fuel ratio sensor connector.

      2. Remove the fuel ratio sensor. Click here

    2. For unleaded gasoline engine:


      1. Disconnect the oxygen sensor connector.

      2. Remove the oxygen sensor. Click here

    3. Remove the 4 bolts, 2 nuts, and 2 compression springs.

    4. Remove the 2 gaskets from the exhaust pipe assembly front.

    5. Disconnect the exhaust pipe support, and remove the exhaust pipe assembly front.

  2. REMOVE EXHAUST PIPE ASSEMBLY CENTER


    1. Remove the 2 bolts and gasket from the exhaust pipe assembly center.

    2. Disconnect the exhaust pipe supports, and remove the exhaust pipe assembly center.

  3. REMOVE EXHAUST PIPE ASSEMBLY TAIL


    1. Disconnect the exhaust pipe support, and remove the exhaust pipe assembly tail.