THEFT DETERRENT SYSTEM DATA LIST / ACTIVE TEST


  1. DATA LIST

    Tech Tips

    Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    Note

    In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Main Body / Data List.

    5. According to the display on the GTS, read the Data List.

      Main Body
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      ACC SW Power switch/ON or OFF

      ON: Power switch on (ACC)

      OFF: Power switch off

      		 -
      IG SW Power switch/ON or OFF

      ON: Power switch on (IG)

      OFF: Power switch off or on (ACC)

      		 -
      RR Door Courtesy SW Rear door courtesy light switch RH/ON or OFF

      ON: Rear door RH or LH open

      OFF: Rear door RH and LH closed

      		 -
      RL Door Courtesy SW Rear door courtesy light switch LH/ON or OFF

      ON: Rear door LH or RH open

      OFF: Rear door LH and RH closed

      		 -
      Back Door Courtesy SW Back door courtesy switch/ON or OFF

      ON: Back door open

      OFF: Back door closed

      		 -
      FR Door Lock Pos Front door RH unlock detection switch/LOCK or UNLOCK

      LOCK: Front door RH locked

      UNLOCK: Front door RH unlocked

      		 -
      FR Door Courtesy Front door courtesy light switch RH/ON or OFF

      ON: Front door RH open

      OFF: Front door RH closed

      		 -
      FL Door Lock Pos Front door LH unlock detection switch/LOCK or UNLOCK

      LOCK: Front door LH locked

      UNLOCK: Front door LH unlocked

      		 -
      FL Door Courtesy Front door courtesy light switch LH/ON or OFF

      ON: Front door LH open

      OFF: Front door LH closed

      		 -
      Hood Courtesy SW Engine hood courtesy switch signal/ON or OFF

      ON: Engine hood open

      OFF: Engine hood closed

      		 -
      RR-Door Lock Pos SW Rear door RH unlock detection switch/ON or OFF

      ON: Rear door RH or LH unlocked

      OFF: Rear door RH and LH locked

      		 -
      RL-Door Lock Pos SW Rear door LH unlock detection switch/ON or OFF

      ON: Rear door LH or RH unlocked

      OFF: Rear door LH and RH locked

      		 -
      Intrusion Sens OFF SW* Intrusion sensor cancel switch/ON or OFF

      ON: Intrusion sensor cancel switch on

      OFF: Intrusion sensor cancel switch off

      		 -
      Intrusion Sensor* Detection status of the intrusion sensor/ON or OFF

      ON: Intrusion detected

      OFF: Intrusion not detected

      		 -
      Intrusion Sen Conn* Intrusion sensor connecting/ON or OFF

      ON: Intrusion sensor connected

      OFF: Intrusion sensor not connected

      		 -
      Sealed Glas Brak Sen* Glass breakage sensor connecting/with or without

      With: Glass breakage sensor connected

      Without: Glass breakage sensor not connected

      		 -
      Intrusion Win Opened* The sensitivity of the intrusion sensor when a door window is open/ON or OFF Customized value displayed -
      Security control with mechanism key This function set to be able to release security alarm with the mechanism key/ON or OFF Customized value displayed -

      • *: w/ Intrusion Sensor Cancel Switch

  2. ACTIVE TEST

    Tech Tips

    Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. The Data List information can be displayed while performing Active Tests.


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Main Body or Combination Meter / Active Test.

    5. According to the display on the GTS, perform the Active Test.

      Main Body
      Tester Display Test Part Control Range Diagnostic Note
      Security Indicator Security indicator ON / OFF -
      Security Horn2*1 Theft warning siren ON / OFF -
      Vehicle Horn Vehicle horns ON / OFF -
      Security Horn*2 Security horn ON / OFF -
      Power for Intrusion sensor*1 Intrusion sensor power supply ON / OFF -

      • *1: w/ Intrusion Sensor Cancel Switch

      • *2: w/o Intrusion Sensor Cancel Switch

      Combination Meter
      Tester Display Test Part Control Range Diagnostic Note
      Hazard Hazard warning lights ON / OFF -