ELECTRICAL KEY OSCILLATOR(for Luggage Compartment) INSTALLATION

CAUTION / NOTICE / HINT

Tip:

A bolt without a torque specification is shown in the standard bolt chart (Click here).

PROCEDURE

  1. INSTALL INDOOR NO. 3 ELECTRICAL KEY OSCILLATOR

    B220789

    1. Install the electrical key oscillator with the bolt.

    2. Connect the connector.

  2. INSTALL REAR NO. 2 SEAT ASSEMBLY (w/ Rear No. 2 Seat)

    1. Install the rear No. 2 seat assembly (Click here).

  3. INSTALL FRONT DECK FLOOR BOX (w/o Rear No. 2 Seat)

    Click hereClick here

  4. INSTALL NO. 2 DECK BOARD (w/o Rear No. 2 Seat)

    Click hereClick here

  5. INSTALL NO. 1 DECK BOARD (w/o Rear No. 2 Seat)

    Click hereClick here

  6. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    Click hereClick here