VEHICLE STABILITY CONTROL SYSTEM, Diagnostic DTC:C1300

DTC Code DTC Name
C1300 Skid Control ECU Malfunction

DESCRIPTION

The skid control ECU (brake actuator assembly) stores this DTC if malfunctions are found in a circuit inside the ECU by self diagnosis.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

Note

C1300

Skid Control ECU Malfunction

Internal failure of the skid control ECU (brake actuator assembly).

Skid control ECU (brake actuator assembly)

Tire pressure warning light (w/ tire pressure warning system) blinks for 63 seconds and then remains on.

PROCEDURE

  1. REPLACE BRAKE ACTUATOR ASSEMBLY

    1. Replace the skid control ECU (brake actuator assembly).

      Click hereClick here

      Tip:

      This DTC is stored when the skid control ECU (brake actuator assembly) detects a malfunction in an internal circuit.

    2. Perform system variant learning and acceleration sensor zero point calibration.

      Click hereClick here

    3. Perform the sensor check using the Test Mode procedure.

      Click hereClick here

      Chassis > ABS/VSC/TRC > Utility

      Tester Display

      Test Mode

    Result

    Proceed to

    NEXT
    NEXT

    END