FRONT DOOR BELT MOULDING INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL FRONT DOOR BELT MOULDING ASSEMBLY

   
   

   1. 

      Install in this Direction

      Engage the 8 claws as shown in the illustration to install the front door belt moulding assembly.

2. INSTALL FRONT DOOR FIX WINDOW GLASS

   Click here

3. INSTALL FRONT DOOR FRONT LOWER FRAME SUB-ASSEMBLY

   Click here

4. INSTALL FRONT DOOR GLASS RUN

   Click here

5. INSTALL FRONT DOOR GLASS SUB-ASSEMBLY

   Click here

6. INSTALL FRONT DOOR SERVICE HOLE COVER

   Click here

7. INSTALL FRONT DOOR NO. 1 TRIM BRACKET

   Click here

8. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY

   Click here

9. INSTALL FRONT DOOR NO. 1 STIFFENER CUSHION

   Click here

10. INSTALL COURTESY LIGHT ASSEMBLY

    Click here

11. INSTALL DOOR ARMREST COVER

    Click here

12. INSTALL MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT DOOR UPPER ARMREST BASE PANEL (for Driver Side)

    Click here

13. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR UPPER ARMREST BASE PANEL (for Front Passenger Side)

    Click here

14. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG

    Click here

15. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

16. INITIALIZE POWER WINDOW CONTROL SYSTEM

    Click here

17. INSPECT POWER WINDOW OPERATION

    Click here