RELAY ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT DEFOGGER RELAY


    1. Check the resistance.


      1. A001V90

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        3 - 4 Battery voltage applied to terminals 1 and 2 10 kΩ or higher
        3 - 4 Battery voltage not applied between terminals Below 1 Ω
        3 - 5 Battery voltage applied to terminals 1 and 2 Below 1 Ω
        3 - 5 Battery voltage not applied between terminals 10 kΩ or higher
        4 - 5 Always 10 kΩ or higher

        If the result is not as specified, replace the defogger relay.