AUDIO AND VISUAL SYSTEM(for Radio Receiver Type) CD cannot be Inserted / Played or CD is Ejected Right After Insertion

PROCEDURE

1. CHECK IF A PROPER CD IS INSERTED

   1. Make sure that the CD is an audio CD or a CD with an MP3 or WMA file, and that it is not deformed, flawed, stained, deteriorated or otherwise defective.

      OK

      CD is normal.

      Tip:

      • Translucent or uniquely-shaped CDs cannot be played.

      • CDs with adhesive paper labels should not be played.

      • Commercial audio CDs can be played.

      • CD-DA files on CD-ROMs, CD-Rs and CD-RWs can be played.

      • MP3 and WMA files on CD-ROMs, CD-Rs and CD-RWs can be played.

      • For details on playable CDs, refer to the Owner's Manual.

   Result

   Proceed to
   OK
   NG

   NG

   END (CD IS FAULTY)

   OK

2. CHECK THAT CD IS INSERTED PROPERLY

   1. Check whether or not the CD is inserted upside down.

      OK

      CD is properly inserted.

   Result

   Proceed to
   OK
   NG

   NG

   SET CD PROPERLY

   OK

3. CLEAN CD AND RECHECK

   1. 

      Disc cleaning.

      1. If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to outside in a radial direction.

         OK

         Malfunction disappears.

         Note:

         Do not use a conventional record cleaner or anti-static preservative.

   Result

   Proceed to
   OK
   NG

   OK

   END

   NG

4. REPLACE CD AND RECHECK

   1. Replace the CD with a known good one and check that the malfunction disappears.

      OK

      Malfunction disappears.

   Result

   Proceed to
   OK
   NG

   OK

   END (CD WAS FAULTY)

   NG

   REPLACE RADIO RECEIVER ASSEMBLY

   for Sedan:Click hereClick here

   for Hatchback, Wagon:Click here