WIRELESS DOOR LOCK CONTROL SYSTEM(w/o Entry and Start System) SYSTEM DESCRIPTION

  1. WIRELESS DOOR LOCK CONTROL SYSTEM DESCRIPTION

    1. This system locks and unlocks the vehicle doors remotely. The wireless control system has the following features:

      • The door control receiver performs the code identification procedure and the main body ECU operates the door lock control. A serial data link is provided for communication between the receiver and main body ECU.

      • A key-integrated type transmitter is used and it contains the following 3 switches: the door lock switch, door unlock switch and luggage switch.

  2. FUNCTION OF MAIN COMPONENTS

    Component

    Function

    Door control transmitter

    • Contains lock, unlock and luggage switches.

    • Transmits weak electric waves (recognition codes and function codes) to door control receiver.

    Door control receiver

    Receives weak electric waves (recognition codes and function codes) from door control transmitter, and changes waves to code data.

    Door lock (door unlock detection switch)

    Transmits door lock conditions of each door to main body ECU.

    Unlock warning switch

    Detects if key is in ignition key cylinder.

    Front door courtesy light switch

    Rear door courtesy light switch

    Back door courtesy light switch

    Turns on when door is open and off when door is closed. Outputs door status (open or closed) to main body ECU.

  3. SYSTEM FUNCTION

    1. The wireless door lock control system has the following functions.

      Function

      Outline

      All door lock function

      Pressing the lock switch locks all the doors.

      All door unlock operation

      Pressing the unlock switch unlocks all the doors.

      Back door open function

      Pressing the luggage switch unlocks the back door.

      Answer-back function

      When the doors are locked, the hazard warning lights and side turn signal lights flash once. When the doors are unlocked, the hazard warning lights and side turn signal lights flash twice.

      Automatic locking function

      If no doors are opened within 30 seconds after being unlocked by the wireless transmitter, all the doors are locked again automatically.

      Illuminated entry function

      • When the map light DOOR switch is on and all the doors are locked, pressing the unlock switch causes the dome light (map light and No. 1 room light) illumination to turn on and all the doors to unlock simultaneously.

      • If the doors have not been opened, the dome light (map light and No. 1 room light) turns off in approximately 15 seconds.

      Transmitter recognition code registration function

      Enables 4 modes for registering (writing and storing) transmitter recognition codes in the EEPROM built into the door control receiver.
      Tip:

      With no key in the ignition key cylinder (unlock warning switch is off) and all door courtesy light switches off, pressing the door control transmitter's lock or unlock switch causes the transmitter to output weak electrical waves to the door control receiver.