SFI SYSTEM DETAILS ACCELERATOR PEDAL SENSOR

  1. CONSTRUCTION

    1. The non-contact type accelerator pedal sensor assembly uses a Hall IC.

    2. This accelerator pedal sensor assembly includes 2 Hall ICs and circuits for the main and sub signals. It converts the accelerator pedal opening angle into voltage signals with 2 differing characteristics and outputs them to the ECM.

    3. When the accelerator pedal opening angle is greater than a predetermined amount, the ECM detects a "kick down mode" from the signal provided by the accelerator pedal sensor assembly.

      Figure 1. LHD Models
      W116290C01

      *1

      Accelerator Pedal Sensor Assembly

      -

      -
      Figure 2. RHD Models
      W116291C01

      *1

      Accelerator Pedal Sensor Assembly

      -

      -