SFI SYSTEM, Diagnostic DTC:P060B

DTC Code DTC Name
P060B Internal Control Module A/D Processing Performance

DESCRIPTION

This DTC is stored when a communication error occurs in the ECM.

DTC No.

DTC Detection Condition

Trouble Area

P060B

An ECM main CPU communication error (1 trip detection logic).

ECM

CAUTION / NOTICE / HINT

Note:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work (Click here).

PROCEDURE

  1. CHECK DTC

    1. Clear the DTC (Click here).

    2. Turn the ignition switch off.

    3. Disconnect the cable from the negative (-) battery terminal and wait for 1 minute.

    4. Reconnect the cable to the negative (-) battery terminal.

    5. Turn the ignition switch to ON.

    6. Check for DTCs.

      Table 1. Result

      Result

      Proceed to

      DTC is not output

      A

      DTC P060B is output

      B

      DTC P060B and P0327 or P0328 are output

      C

    CHECK FOR INTERMITTENT PROBLEMS

    (Click here)

    REPLACE ECM

    (Click here)

    GO TO DTC (P0327, P0328)

    (Click here)