REAR SEAT INNER BELT ASSEMBLY(for Sedan) INSPECTION

PROCEDURE

  1. INSPECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH

    1. B332789C02

      *a

      Component without harness connected

      (Rear Seat Inner with Center Belt Assembly LH)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      1 - 2

      Rear center seat belt not fastened

      Below 1 Ω

      1 - 2

      Rear center seat belt fastened

      10 kΩ or higher

      3 - 4

      Rear LH seat belt not fastened

      Below 1 Ω

      3 - 4

      Rear LH seat belt fastened

      10 kΩ or higher

      If the result is not as specified, replace the rear seat inner with center belt assembly LH.

  2. INSPECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH

    1. B447323C01

      *a

      Component without harness connected

      (Rear Seat Inner with Center Belt Assembly RH)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      1 - 2

      Rear RH seat belt not fastened

      Below 1 Ω

      1 - 2

      Rear RH seat belt fastened

      10 kΩ or higher

      If the result is not as specified, replace the rear seat inner with center belt assembly RH.