THEFT DETERRENT SYSTEM DATA LIST / ACTIVE TEST


  1. DATA LIST

    Tech Tips

    Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Main Body / Data List.

    5. According to the display on the GTS, read the Data List.

      Main Body
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Security System Theft deterrent system / OFF or ON Customization status displayed -
      D Door Courtesy SW Front RH door courtesy light switch signal / OFF or ON

      OFF: Driver side door closed

      ON: Driver side door open

      		 -
      D-Door Lock Pos SW Front RH door lock position switch signal / OFF or ON

      OFF: Driver side door locked

      ON: Driver side door unlocked

      		 -
      P Door Courtesy SW Front LH door courtesy light switch signal / OFF or ON

      OFF: Passenger side door closed

      ON: Passenger side door open

      		 -
      P-Door Lock Pos SW Front LH door lock position switch signal / OFF or ON

      OFF: Passenger side door locked

      ON: Passenger side door unlocked

      		 -
      Luggage Courtesy SW Luggage compartment door courtesy switch / OFF or ON

      OFF: Luggage compartment door closed

      ON: Luggage compartment door open

      		 -
      IG SW Engine switch status / OFF or ON

      OFF: Engine switch off

      ON: Engine switch on (IG)

      		 -
      ACC SW Engine switch status / OFF or ON

      OFF: Engine switch off

      ON: Engine switch on (ACC)

      		 -
      Hazard Output Hazard warning light signal output OFF or ON

      OFF: Hazard warning light not blinks

      ON: Hazard warning light blinks (Theft deterrent system is in alarm sounding state)

      		 -
      Horn Output Vehicle horn sounding signal output OFF or ON

      OFF: Vehicle horns not sounding

      ON: Vehicle horns sounding (Theft deterrent system is in alarm sounding state)

      		 -
      Immobiliser Light Security indicator light status / OFF or ON

      OFF: Security indicator light OFF

      ON: Security indicator light ON

      		 -

  2. ACTIVE TEST

    Tech Tips

    Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. The Data List can be displayed while performing Active Tests.


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Main Body / Active Test.

    5. According to the display on the GTS, perform the Active Test.

      Main Body
      Tester Display Test Part Control Range Diagnostic Note
      Security Indicator Security indicator light ON/OFF -
      Vehicle Horn Vehicle horns ON/OFF -