LIGHTING SYSTEM OPERATION CHECK


  1. INSPECT ILLUMINATED ENTRY SYSTEM OPERATION

    Note

    Perform this inspection with the customize parameters at the initial settings.

    Tech Tips

    Perform this inspection with the door linked switch of the map light (roof console box sub-assembly) on*1 or the switch of the room light assembly in the DOOR position*2.


    • *1: w/ Room Light (for LED Type)

    • *2: w/ Room Light (for Bulb Type)

    Control Condition Lights that Operate
    Actuation Area-linked*1 With the engine switch off and all of the doors closed and locked, enter an exterior detection area while carrying an electrical key transmitter and check that the lights that operate turn on for approximately 15 seconds and then turn off.
    • Map Light (Roof Console Box Sub-assembly)*3

    • Spot Light Assembly*3

    • Room Light Assembly*4

    • Footwell Light (No. 1 Interior Illumination Light Assembly)*5

    • Front Door Inside Handle Illumination Light (No. 1 Interior Illumination Light Assembly)*6

    • Rear Door Inside Handle Illumination Light (No. 2 Interior Illumination Light Assembly)*7

    • Instrument Panel Ambient Illumination Light (Instrument Panel Light Assembly)*8

    Door Lock/Unlock-linked With the ignition switch off and all of the doors closed and locked, unlock any door using an unlock operation (key-linked, wireless or entry unlock operation) and check that the lights that operate turn on for 15 seconds and then turn off.
    • Ignition Key Cylinder Light (Transponder Key Coil)*2

    • Map Light (Roof Console Box Sub-assembly)*3

    • Spot Light Assembly*3

    • Room Light Assembly*4

    • Footwell Light (No. 1 Interior Illumination Light Assembly)*5

    • Front Door Inside Handle Illumination Light (No. 1 Interior Illumination Light Assembly)*6

    • Rear Door Inside Handle Illumination Light (No. 2 Interior Illumination Light Assembly)*7

    • Instrument Panel Ambient Illumination Light (Instrument Panel Light Assembly)*8

    Door Open/Close-linked With the ignition switch off and all of the doors closed, open any door and check that the lights that operate turn on. While the lights that operate are on, close all of the doors and check that the lights that operate turn off after approximately 15 seconds.
    • Ignition Key Cylinder Light (Transponder Key Coil)*2

    • Map Light (Roof Console Box Sub-assembly)*3

    • Spot Light Assembly*3

    • Room Light Assembly*4

    • Footwell Light (No. 1 Interior Illumination Light Assembly)*5

    • Front Door Inside Handle Illumination Light (No. 1 Interior Illumination Light Assembly)*6

    • Rear Door Inside Handle Illumination Light (No. 2 Interior Illumination Light Assembly)*7

    • Instrument Panel Ambient Illumination Light (Instrument Panel Light Assembly)*8

    With the engine switch off and all of the doors closed, open any door and check that the light that operates turns on. While the light that operates is on, close all of the doors and check that the light that operates turns off after approximately 40 seconds. Engine Switch Illumination*1
    With the ignition switch in ON, open any door and check that the lights that operate turn on. While the lights that operate are on, close all of the doors and check that the lights that operate turn off.
    • Ignition Key Cylinder Light (Transponder Key Coil)*2

    • Map Light (Roof Console Box Sub-assembly)*3

    • Spot Light Assembly*3

    • Room Light Assembly*4

    Engine Switch-linked*1 Turn the engine switch from on (ACC) or on (IG) to off and check that the lights that operate turn on for approximately 15 seconds and then turn off.
    • Map Light (Roof Console Box Sub-assembly)*3

    • Spot Light Assembly*3

    • Room Light Assembly*4

    • Footwell Light (No. 1 Interior Illumination Light Assembly)*5

    • Front Door Inside Handle Illumination Light (No. 1 Interior Illumination Light Assembly)*6

    • Rear Door Inside Handle Illumination Light (No. 2 Interior Illumination Light Assembly)*7

    • Instrument Panel Ambient Illumination Light (Instrument Panel Light Assembly)*8

    Turn the engine switch from on (ACC) or on (IG) to off and check that the light that operates turns on for approximately 40 seconds and then turns off. Engine Switch Illumination
    Ignition Switch-linked*2 Turn the ignition switch from ACC or ON to off and check that the lights that operate turn on for approximately 15 seconds and then turn off.
    • Ignition Key Cylinder Light (Transponder Key Coil)*2

    • Map Light (Roof Console Box Sub-assembly)*3

    • Spot Light Assembly*3

    • Room Light Assembly*4

    Shift Position-linked With the ignition switch in ACC or ON, move the shift lever from P to any other position and check that the lights that operate dim. While the lights that operate are on, move the shift lever to P and check that the lights that operate return to full brightness.
    • Footwell Light (No. 1 Interior Illumination Light Assembly)*5

    • Front Door Inside Handle Illumination Light (No. 1 Interior Illumination Light Assembly)*6

    • Rear Door Inside Handle Illumination Light (No. 2 Interior Illumination Light Assembly)*7

    • Instrument Panel Ambient Illumination Light (Instrument Panel Light Assembly)*8


    • *1: w/ Smart Entry and Start System

    • *2: w/o Smart Entry and Start System

    • *3: w/ Room Light (for LED Type)

    • *4: w/ Room Light (for Bulb Type)

    • *5: w/ Footwell Light

    • *6: w/ Front Door Inside Handle Illumination Light

    • *7: w/ Rear Door Inside Handle Illumination Light

    • *8: w/ Instrument Panel Ambient Illumination Light

  2. INSPECT BATTERY SAVING CONTROL OPERATION


    1. The operations and conditions of this control are described below.

      Control Condition Lights that Operate
      Basic operation

      When 20 minutes elapse after the ignition switch is turned from ACC or ON to off and the lights that operate remain on, the lights are turned off.

      Tech Tips

      Battery saving control is canceled when any of the following operations is performed before the lights are turned off by battery saving control. After the operation is performed, the lights remain on for another 20 minutes and then the lights are turned off.


      • The ignition switch is turned ACC or ON.

      • Any door is opened and closed.

      • The luggage compartment door is opened and closed.

      • Any door is unlocked.

      • The key enters any exterior actuation area.*1


      • Engine Switch Illumination*1

      • Ignition Key Cylinder Light (Transponder Key Coil)*2

      • Map Light (Roof Console Box Sub-assembly)*3

      • Spot Light Assembly*3

      • Room Light Assembly*4

      • Footwell Light (No. 1 Interior Illumination Light Assembly)*5

      • Front Door Inside Handle Illumination Light (No. 1 Interior Illumination Light Assembly)*6

      • Rear Door Inside Handle Illumination Light (No. 2 Interior Illumination Light Assembly)*7

      • Instrument Panel Ambient Illumination Light (Instrument Panel Light Assembly)*8

      Interior light auto cut operation

      When 20 minutes elapse after the ignition switch is turned from ACC or ON to off and the lights that operate remain on, the lights are turned off.

      Tech Tips

      Battery saving control is canceled when any of the following operations is performed before the lights are turned off by battery saving control. After the operation is performed, the lights remain on for another 20 minutes and then the lights are turned off.


      • The ignition switch is turned ACC or ON.


      • Map Light (Roof Console Box Sub-assembly)*3

      • Spot Light Assembly*3

      • Room Light Assembly*4

      • Vanity Light Assembly

      • No. 1 Luggage Compartment Light Assembly

      • Courtesy Light Assembly*9


      • *1: w/ Smart Entry and Start System

      • *2: w/o Smart Entry and Start System

      • *3: w/ Room Light (for LED Type)

      • *4: w/ Room Light (for Bulb Type)

      • *5: w/ Footwell Light

      • *6: w/ Front Door Inside Handle Illumination Light

      • *7: w/ Rear Door Inside Handle Illumination Light

      • *8: w/ Instrument Panel Ambient Illumination Light

      • *9: w/ Courtesy Light