WHEEL CAP REPLACEMENT

PROCEDURE


  1. REPLACE WHEEL CAP


    1. B008LHUC01
      B008MCV Fastening Tape
      B008KV1 Place Hands Here
      B008LJK Remove in this Direction

      Disengage the claws, fastening tapes and pins to remove the wheel cap as shown in the illustration.

      Note

      When removing the wheel cap, disengage each location where your hands are placed one by one, and do not attempt to disengage everything at once.

    2. B008K76C01
      B008MCV Fastening Tape

      Remove the 5 fastening tapes from the disc wheel.

    3. Wipe off any tape adhesive residue from the disc wheel with a neutral detergent.

    4. Using a heat light, heat the disc wheel and a new wheel cap.

      Heating Temperature
      Item Temperature
      Disc Wheel 20 to 40°C (68 to 104°F)
      Wheel Cap 20 to 40°C (68 to 104°F)

      CAUTION:


      • Do not touch the heat light and heated parts, touching the heat light may result in burns.

      • Touching heated parts for a long time may result in burns.

      B008LM3C23
      *a Heated Part
      *b Heat Light

      Note

      Do not heat the disc wheel or wheel cap excessively.

    5. A001WME

      Remove the release paper from the 5 fastening tapes of the wheel cap.

      Tech Tips

      After removing the release paper, keep the exposed adhesive free from foreign matter.

    6. B008MGJC01
      B008MCV Fastening Tape
      B008KV1 Place Hands Here
      B008LJK Install in this Direction

      Align the cutout of the valve and the locating pins, and install the wheel cap as shown in the illustration.

    7. Press firmly until the claws and fastening tapes engage.

    8. Check that the wheel cap is not excessively loose.