BACK-UP LIGHT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE

  1. INSTALL BACK-UP LIGHT ASSEMBLY LH

    1. Install the back up light assembly LH with the 2 screws and 2 clips.

    2. w/o Rear Fog Light:

      Connect the connector and attach the wire harness clamp.

    3. w/ Rear Fog Light:

      Connect the 2 connectors and attach the wire harness clamp.

  2. INSTALL REAR BUMPER COVER

    Click hereClick here