REAR FOG LIGHT SWITCH REMOVAL

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE NO. 1 SWITCH HOLE BASE


    1. A01DZXKE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the No. 1 switch hole base.

    2. Using moulding remover D, detach the 5 claws and remove the No. 1 switch hole base.

    3. Disconnect the connectors.

  2. REMOVE REAR FOG LIGHT SWITCH


    1. A01DYMD

      Detach the 2 claws and remove the rear fog light switch.