BRAKE MASTER CYLINDER (w/ VSC) REASSEMBLY


  1. INSTALL BRAKE MASTER CYLINDER RESERVOIR STRAINER


    1. Install the brake master cylinder reservoir strainer to the brake master cylinder reservoir assembly.

  2. INSTALL BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY


    1. Install the brake master cylinder reservoir filler cap assembly to the brake master cylinder reservoir assembly.

  3. INSTALL BRAKE FLUID INFORMATION LABEL

  4. INSTALL MASTER CYLINDER RESERVOIR GROMMET


    1. A01DWH3E02

      Apply a light coat of lithium soap base glycol grease to 2 new master cylinder reservoir grommets.

    2. Install the 2 master cylinder reservoir grommets to the brake master cylinder reservoir assembly.

  5. INSTALL BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY


    1. Install the brake master cylinder reservoir assembly to the master cylinder sub-assembly.

    2. Mount the brake master cylinder sub-assembly in a vise.

      Note

      Place aluminum plates on the vise to prevent damage to the brake master cylinder sub-assembly.

    3. Using a pin punch and hammer, install the master cylinder pin to the brake master cylinder reservoir.