VACUUM SWITCHING VALVE (w/o EGR Cooler) REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

  2. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY


    1. A01DYO3

      Remove the 3 bolts, 2 nuts and cover.

  3. REMOVE VACUUM SWITCHING VALVE BRACKET


    1. A01DWGJ

      Disconnect the 2 connectors.

    2. Disconnect the vacuum hoses from the 3 locations.

    3. Remove the 2 bolts and bracket.

  4. REMOVE VACUUM SWITCHING VALVE (for EGR Cut)

    A01DWOF

    1. Remove the bolt and valve.