BLIND SPOT MONITOR MAIN SWITCH(for RHD) INSTALLATION

PROCEDURE

1. INSTALL TELLTALE LIGHT ASSEMBLY (BLIND SPOT MONITOR MAIN SWITCH)

   1. Connect the connector.

   2. Attach the claw and 2 clips to install the telltale light assembly (blind spot monitor main switch).

2. INSTALL CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL

   Click here

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click hereClick hereClick hereClick here